基于STM32单片机的大学生体能监测仪设计与实现

体能监控仪作为生命体征监测设备,对于辅助大学生完成体能训练有很大帮助;基于STM32单片机技术,设计开发集成了多种传感器的一种大学生体能监测装备,它能够有效的检测包括心率检测、人体的步数、运动圈速、消耗卡路里等信息;该设计采用了STM32作为主控芯片,采用模块化的设计思路;在系统硬件设计方面,设计了包括STM32控制系统、心率获取电路、三轴传感器电路、显示电路以及按键电路等;同时将软件模块拆分成了初始化子程序、心率获取子程序,步数获取子程序,显示子程序等;Proteus仿真结果显示,使用STM32单片机技术设计的体能监测系统,能够运行稳定,测量心率范围60次/min~180次/min,可在心率异常时报警,同时检测步数的准确率达98%,满足体能监测任务需要,实验结果符合预期;为STM32单片机在体育运动研究信息化中应用提供参考。     

Type-II AsP/Sc2CO2 van der Waals heterostructure: an excellent photocatalyst for overall water splitting

In this work, we explore the application potential of AsP/M₂CO₂ (M = Sc, Zr) van der Waals heterostructures in photocatalytic water splitting through the first-principles calculations. The calculated results show that AsP/Zr₂CO₂ heterostructure possesses an unfavorable type-Ⅰ band alignment, whereas AsP/Sc₂CO₂ exhibits a desirable type-Ⅱ band alignment, which is beneficial for separating the photogenerated electron-hole pairs. Also, the band edge positions of AsP/Sc₂CO₂ heterostructure stride the redox potential of water, ensuring favorable reaction kinetics. Besides, the strong optical absorption of AsP/Sc₂CO₂ heterostructure in both visible and ultraviolet regions (especially up to 10⁻⁶ cm⁻¹ at about 250 nm) makes it possible to utilize solar energy effectively. Meanwhile, AsP/Sc₂CO₂ heterostructure has an exciton binding energy as low as 0.09 eV, which quantitatively illustrates the high separation efficiency of photogenerated charge carrier. Thus, the type-Ⅱ band alignment, suitable band edge position, strong light absorption, and low exciton binding energy together indicate that AsP/Sc₂CO₂ heterostructure is a potential photocatalytic material. In addition, the obvious redshift phenomenon in the optical spectrum of AsP/Sc₂CO₂ heterostructure shows that biaxial strain can improve its light capture capability. Also, the interconversion between type-Ⅱ and type-Ⅰ can be achieved by applying different strains. All these findings suggest that the novel AsP/Sc₂CO₂ heterostructure has significant application prospects in next-generation photovoltaic and photocatalytic devices.     

三门峡水库汛期排沙效果研究

三门峡水库汛期排沙是解决泥沙淤积问题、控制潼关高程的关键途径。"蓄清排浑"运用以来,非汛期蓄水期库区发生淤积、汛期降低水位运用排泄全年泥沙,基本保持了库区动态冲淤平衡。不同控制水位和入库流量过程存在不同的排沙效果,针对三门峡水库汛期排沙过程的差异,对"蓄清排浑"运用以来汛期排沙特征进行统计,分析了水库敞泄和不同控制水位运用对排沙效果的影响。结果表明,在汛期平水305 m、洪水敞泄的运用条件下,水库排沙具有多来多排的特点,汛期排沙总量与入库含沙量和水量密切相关;完全敞泄时库区冲刷取决于流量大小和敞泄时间,净排沙效率随着水量的增加和敞泄时间的延长而减小,冲刷效率降低;汛期控制运用期,当流量在1000 m~3/s以上时、水位在305～311 m也会产生一定的排沙,排沙效果取决于含沙水流在壅水段的滞留时间和出入库流量之比。研究成果可为三门峡水库运用方式的优化提供依据。     

A novel profile with high efficiency for hydrogen-circulating Roots pumps used in FCVs

Low flow rate is one of the primary disadvantages of Roots pumps when they are applied in hydrogen fuel cell vehicles. A novel profile for Roots pumps was developed in this paper to increase the working volume and reduce the internal leakage. The available range of the design parameters of the Roots pump with the new profile was determined analytically, and an improvement in the working volume was validated. The flow dynamics inside the traditional and new pumps were investigated by experiments and numerical simulations. The analytical results indicated that the maximum area utilization of the new profile was approximately 10.4% higher than that of the traditional profile at the same lobe number. The numerical results demonstrated the superiority of the proposed profile in high flow rate and sealing. The tip concentric arcs of the new profile reduced the internal leakage via the radial gap. The characteristic of multipoint meshing within a certain range of rotational angles reduced the interlobe leakage.     

Experimental study on combustion stability and performance of hydrogen-enriched compressed natural gas of a free-piston linear generator

Free Piston linear Generator (FPLG) engine fueled by compressed natural gas (CNG) has recently gained increased research attention. However, due to the low-velocity burning and poor lean limit of CNG fuel, the FPLG engine combustion stability, performance, and efficiency are still low. Hydrogen has a greater burning velocity with wider flame limits that could extend the lean burn limits and combustion characteristics of CNG. This paper compares pure CNG and 10% hydrogen-enriched CNG at various ignition speeds (0.6 ms, 0.8 m/s, and 1 m/s), injection positions (0 mm, 5 mm, 10 mm and 15 mm), and lambda ratios (0.9, 1.4 and 1.7) on the combustion characteristics, performance, and conversion efficiency are duly discussed. The findings show that the FPLG combustion stability limits increase with the hydrogen addition into the CNG. The CNG in-cylinder pressure increases significantly when the injection position is advanced, whereas the hydrogen addition reduces the influence of the injection position. The heat release rate increases by 15.62% and 23.72% with hydrogen addition, corresponding to the advanced and retarded injection positions. Consequently, the hydrogen addition increases the power RMS to 209.21 W and 232.64 W with an increment of 3.46% and 3.13%, respectively. Conclusively, the hydrogen addition into the CNG evidently shortens the combustion duration while improving the heat release rate, combustion stability, power RMS, Cycle-to-Cycle variation, and conversion efficiency.     

Comparison of thermophilic and hyperthermophilic dark fermentation with subsequent mesophilic methanogenesis in expanded granular sludge bed reactors

Herein, dark fermentation (DF, V = 5.5 L) and subsequent mesophilic methanogenesis (V = 43.5 L) are run as expanded granular sludge bed reactors (EGSB) at thermophilic (υDF = 60 °C) and hyperthermophilic (υDF = 80 °C) temperatures. A synthetic glucose wastewater is run with a 22.5 g/L chemical oxygen demand (COD) and 48–9 h hydraulic retention times (HRTs), giving organic loading rates (OLRs) of 11–60 g COD/L/d for DF. The maximum hydrogen production rate (HPR) is HPR = 3.0 m³/m³/d for HRT = 9 h with a 50 L/kg COD hydrogen yield (HY) and 40 vol% H₂. Methane production rate (MPR) reaches MPR = 2.6 m³/m³/d with 70 vol% CH₄ at HRT = 2.8 d. The highest H₂ yields are HY = 180 L/kg COD with 53 vol% H₂ (thermophilic, HRT = 48 h). Hyperthermophilic temperatures led to lower HPRs (0.7 m³/m³/d) and MPRs (1.6 m³/m³/d). 53% of Thermoanaerobacterium thermosaccharolyticum as an H₂ producer are found. Discoloration of granular sludge from black to white and granule stability was observed in DF.     

Slow strain rate technique for studying hydrogen induced cracking in 34CrMo4 high strength steel

Alloy hardened steels offer excellent combination of mechanical properties, hardenability and corrosion resistance. 34CrMo4 is a medium carbon, low alloy steel widely used due to a good combination of high-strength, toughness and wear resistance. However, this steel experiences hydrogen embrittlement (HE), a complex phenomenon depending on the composition and microstructure. This work estimates de loss of the mechanical properties caused by hydrogen in electrochemically H-charged specimens in absence of mechanical stress but also, at low strain rate and constant load. H-charging for 2 and 6 h induce YS losses of about 40% and 71% and UTS losses of 39% and 59%, respectively. The synergistic effect of the stress and the H-charging process leads to a higher loss, 91%, and a faster brittle fracture even though hydrogen content is similar to those firstly H-charged and then tested in air.     

EFPI-FBG复合光纤传感器高温大应变试验研究

由于缺乏航空发动机/燃气轮机服役环境下叶片温度、应变有效性检测的技术与装置，所以工作叶片的温度环境、载荷环境和应变分布等关键数据的缺失是故障检修工作中的最大困难之一。采用非本征型法布里-珀罗(Extrinsic Farby Perot Interferometric,EFPI)与光纤光栅(Fiber Bragg Grating,FBG)传感技术，研制了一种基于单模光纤的EFPI FBG复合光纤传感器及其解调设备。通过搭建高温拉伸试验平台，开展了基于DZ125材料试件的复合光纤传感器高温、大应变测量的性能测试。试验结果表明：复合光纤传感器的工作温度范围为26 ℃~1 100 ℃，温度测量精度不超过全量程的5%，分辨率为0.066 ℃；F-P传感器的应变测量范围为0~19 468 με，在1 100 ℃下的相对误差为1.96%，分辨率为0.053 με。